Ayuda overclock a esta cpu

[edison1023]

Quisiera saber como hacer overclock a esta Cpu

*AMD athlon 64x2 +4000 2100 Mhz
*MSI K9VGM-V (MS - 7253)
* 1GB RAM DDR2 667
*Fuente generica supuestamente de 500w
Aquí dejo algunos datos del CPU-z

Processors Information
--------------------------------------…

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 4000+
Codename Brisbane
Specification AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
Package Socket AM2 (940)
CPUID F.B.1
Extended CPUID F.6B
Brand ID 4
Core Stepping BH-G1
Technology 65 nm
Core Speed 2100.1 MHz
Multiplier x FSB 10.5 x 200.0 MHz
HT Link speed 1000.0 MHz
Stock frequency 2100 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 10.5x
Max VID 1.350 V

K8 Thermal sensor yes
K8 Revision ID 6.0
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Chipset
--------------------------------------…

Northbridge VIA K8M890CE rev. 00
Southbridge VIA VT8237A rev. 00
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR2
Memory Size 1024 MBytes
Channels Single
Memory Frequency 300.0 MHz (CPU/7)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 6
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 21
Command Rate (CR) 2T

Memory SPD
--------------------------------------…

DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) SpecTek Incorporated (7F7FB5FFFFFFFFFF)
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number
Serial number 85040B52
Manufacturing date Week 165/Year 165
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-9-12 @ 200 MHz
JEDEC #2 4.0-4-4-12-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-20 @ 333 MHz


Hardware Monitors
--------------------------------------…

Hardware monitor Winbond W83627EHF
Voltage 0 1.27 Volts [0x9F] (CPU VCORE)
Voltage 1 1.90 Volts [0xED] (VIN0)
Voltage 2 3.31 Volts [0xCF] (AVCC)
Voltage 3 3.28 Volts [0xCD] (+3.3V)
Voltage 4 1.91 Volts [0xEF] (VIN1)
Voltage 5 1.95 Volts [0xF4] (VIN2)
Voltage 6 1.94 Volts [0xF3] (VIN3)
Voltage 7 1.66 Volts [0xCF] (VIN4)
Temperature 0 32°C (89°F) [0x20] (SYSTIN)
Temperature 1 34°C (92°F) [0x43] (CPUTIN)
Temperature 2 35°C (94°F) [0x45] (AUXTIN)
Fan 1 3409 RPM [0xC6] (CPUFANIN0)

Graphics
--------------------------------------…

Number of adapters 1

Graphic APIs
--------------------------------------…


Display Adapters
--------------------------------------…

Display adapter 0
Name VIA Chrome9 HC IGP
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x1106 (0x1462)
Model ID 0x3230 (0x7253)
Performance Level 0


Software
--------------------------------------…

Windows Version Microsoft Windows 7 (6.1) Ultimate Edition Service Pack 1 (Build 7601)
DirectX Version 11.0


Me gustaria sacarle el MAXIMO RENDIMIENTO POSIBLE!! :P

[Nito_D]

Esa placa no te va a dejar ocear bien. Puedes subir el FSB un poco pero no tienes la opcion de mover el vcore y probablemente tengas problemas si pasas los 1000mhz de HTlink que noc si puedas bajar el multiplicador yo te recomiendo que lo dejes tal cual es bastante probable que puedas dañar algo en la placa. Salu2